If you’ve ever experienced that awful burnt taste from your favorite Orion vaporizer, you’re not alone. This guide will help you understand why this happens and how to fix it, so you can get back to enjoying your vape.

Identifying the problem with your Orion Vape Taste Burnt?

maintenance tips to avoid burnt vape

When you taste a burnt flavor while using your vape, it’s important to know why it’s happening. The most common reason is that the wick inside the coil gets dry and burns. This can happen if there’s not enough e-liquid to keep the wick wet, if you take a lot of quick hits in a short time (called chain vaping), if you use high wattage settings that make the coil too hot, or if the coil is old and worn out. If you notice a sharp, bitter taste or less vapor than usual, your coil might be the culprit. Coils have a limited lifespan and need to be replaced eventually. Another reason could be that the coil wasn’t properly primed before use, causing the e-liquid to heat too quickly and burn. We’ll show you how to fix these issues and get your vape back to its best.

Steps to Fix a Burnt Orion Vape

steps to fix a burnt orion vape

To get your Orion vape back to its best, follow these simple steps:

  1. Disassemble Your Vape

Carefully take your vape apart. Lay out all the pieces so you don’t lose any.

  1. Clean the Parts

Once you have all the parts separated, it’s time for a good cleaning. Wipe away any old e-liquid residue. This will help your vape work better and taste cleaner.

  1. Check the Coil

 The coil is the most important part to check. If it’s old or clogged, replace it with a new one.

  1. Prime the New Coil

Before you put the new coil in, prime it by putting a few drops of e-liquid directly on it. Let it soak for a few minutes. This helps the coil work properly and prevents burning.

  1. Fill the Tank

Fill the tank with your favorite e-liquid. Make sure not to overfill it.

  1. Reassemble Your Vape

 Put all the pieces of your vape back together. Make sure everything fits well and there are no leaks or loose connections.

  1. Test the Vape

 Press the power button and take a puff. Check the taste and the amount of vapor. If the taste is still burnt or the vape isn’t working right, check the coil again or consult the user manual.

By following these steps, you can get your Orion vape working perfectly again.

Testing Your Fixed Vape

After cleaning or replacing the coil and adding new e-liquid, it’s time to test your vape. First, make sure the tank is full but not overfilled. Then, carefully reassemble the vape. Press the power button and take a puff to check the taste and vapor production.

If the taste is still burnt or the vape isn’t working correctly, check if the coil is properly primed and there are no leaks. If problems continue, reinstall the coil or consult the user manual. Regular testing after maintenance helps keep your vape in good condition and prevents future issues.

Maintenance Tips to Avoid Burnt Vapes

maintenance tips to avoid burnt vape

Just like with your health, prevention is always easier than fixing. With your Orion vape, there are a few things you can do to help prevent a dry or burnt hit from ever occurring.

  • Prime the Coil: Always prime a new coil by putting a few drops of e-liquid on it and letting it soak for a few minutes before use. This helps the coil last longer and prevents dry hits.
  • Clean Regularly: Clean the coil and pod in your vape regularly to remove any build-up that can cause burnt flavors. Use warm water mixed with a mild cleaning solution for a thorough clean.
  • Be wary of puff counts: Puff counts are based on very short puffs. Some vapers take really long drags. The puff counter for the liquid is more based on the total time the coil has fired. If you want to get more puffs, take shorter ones.
  • Don’t overcharge: Sometimes a disposable vape can give a burnt taste because the battery is pumping out too much voltage for the coil. The nominal voltage for these devices is 3.7V, but a freshly charged lithium-ion battery will charge to 4.2V for a brief period before going back down toward 3.7V. If it tastes burnt after a charge, take light puffs for a period without fully inhaling. This will start to deplete the battery enough to bring the total power output down. Try a full inhale when the taste feels right.
  • Don’t chase a bad purchase: If you bought a device that tasted burnt from the beginning, it was a dud. But sometimes, those duds can be indicative of a batch issue. Try buying again, but from a different retailer or brand.

By following these prevention tips, you can keep your Orion vape in excellent condition and enjoy a smooth vaping experience.

Conclusion

Knowing how to fix a burnt Orion vape is essential for a great vaping experience. By understanding the causes of burnt tastes, like dry wicking or overheated coils, and following the steps to fix it, you can enjoy your vape again. Regular cleaning, priming new coils, and avoiding chain vaping will also help prevent burnt hits. If you continue to have problems after troubleshooting, contact the manufacturer or a vape enthusiast for help. Taking good care of your Orion vape ensures it will keep delivering a satisfying vaping experience.

How To Fix a Burnt Orion Vape; A Complete Guide